PH2 Phono Pre-Amplifier
The Blackline PH2 is a high performance phono-pre-amplifier that supports both moving coil and moving magnet cartridges. Although some amplifiers have an integral phono stage, PH2 is a dedicated phono pre-amplifier that offers an audible sound upgrade once connected between your Turntable and Amplifier.
PH2 can easily fit into any existing audio system where a phono stage is required.
Even if your existing amplifier has a built in phono stage, PH2 can be connected to Line In and will offer an improved performance as most built in phono stages are not of high quality.
A new addition to our Blackline range, PH2 sits between your amplifier and Turntable and can be switched between moving coil and moving magnet cartridges.
Fundamentally, moving magnet cartridges have a higher level of amplification compared to moving coil type. The phono stage increases the signal level from the turntable cartridge to the amplifier. PH2 will provide a sound improvement over traditional inbuilt phono pre-amplifiers.
Specifications
- S/N Ratio (A Weighting) 85 dB 74 dB
- Input Impedance 47K Ω 1K Ω
- Output Impedance 100 Ω 100 Ω
- Channel Balance 2 dB 2 dB
- Distortion (5mV input) <0.015% <0.015%
- Gain (1 KHz) 40 dB 55 dB
- RIAA Accuracy ± 2 dB ± 2 dB
- Max Input 5 mV 0.5 mV
- Max Output 600 mV 200 mV
- Sensitivity 110 370
- Input 5V USB
- Dimensions: 95 x 58 x 14mm (L x W x H Net Weight75 g
- Colour: Black
PH2 is supplied with a USB UK Adapter and USB cable.